Product Checking And Parts Identification - Mitsubishi Electric FR-D720-0.1K Instruction Manual

Product checking and parts identification

1.1 Product checking and parts identification
Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter model
FR -
Symbol Voltage class
D720 Three-phase 200V class
Three-phase 400V class
D740
Single-phase 200V class
D720S
D710W Single-phase 100V class
Operation panel
(Refer to page 54)
Voltage/current input switch
(Refer to page 20)
PU connector
(Refer to page 29)
Front cover
(Refer to page 5)
Capacity plate
1.5K
Inverter model
Accessory
· Fan cover fixing screws (M3 × 35mm)
These screws are necessary for compliance with the EU Directive. (Refer to the Instruction Manual (Basic))
Capacity
1.5K to 3.7K
5.5K to 15K
SERIAL number check
Rating plate example
Symbol Year Month
SERIAL (Serial No.)
2
-
D740 1.5 K
Represents the
inverter capacity [kW]
Serial number
Quantity
1
2
The SERIAL consists of one symbol, two characters indicating production year and month, and six
characters indicating control number.
The last digit of the production year is indicated as the Year, and the Month is indicated by 1 to 9,
Control number
X (October), Y (November), or Z (December.)
Production year and month
Rating plate
FR-D740-1.5K
Inverter model
Input rating
Output rating
Serial number
Cooling fan
(Refer to page 278)
Control circuit terminal
block
(Refer to page 20)
Control logic switchover
jumper connector
(Refer to page 22)
Main circuit
terminal block
(Refer to page 15)
Combed shaped
wiring cover
(Refer to page 7)
DATE:XXXX-XX