Mitsubishi Electric FR-D720-0.1K Instruction Manual page 95

(2) Jog operation from PU
Select Jog operation mode from the operation panel and PU (FR-PU04/FR-PU07). Operation is performed only while the
start button is pressed.
Operation
1.
Confirmation of the operating status indicator
and operation mode indicator
The monitor mode should have been
selected.
The inverter should be at a stop.
2.
Press to choose the PU Jog operation
mode.
3.
Press .
While is pressed, the motor rotates.
The motor runs at 5Hz. (Pr. 15 initial value)
4.
Release
[When changing the frequency of PU Jog operation]
5.
Press to choose the parameter setting
mode.
6.
Turn until Pr. 15 Jog frequency appears.
7.
Press to show the present set value.
(5Hz)
8.
Turn to set the value to "
(10Hz)
9.
Press to set.
10.
Perform the operations in steps 1 to 4.
The motor rotates at 10Hz.
Frequency setting by external terminals
Inverter
R/L1
Three-phase AC
S/L2
power supply
T/L3
Operation panel
Press
Release
".
Flicker...Parameter setting complete!!
U
V
Motor
W
Display
Stop
PRM indicator is lit.
(The parameter number read previously
appears.)
4
93