Advertisement
1 PRODUCT CHECKING AND PARTS IDENTIFICATION
Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter model
FR
Symbol
Voltage class
Three-phase 400V class
D740
D720S
Single-phase 200V class
Capacity plate
FR-D740-036-EC
Capacity plate
Inverter model Serial number
REMARKS
For how to find the SERIAL number, refer to page 24.
Installation of the inverter
Enclosure surface mounting
Remove the front cover and wiring cover to mount the inverter to the surface.
FR-D740-012(SC) or higher
FR-D720S-070(SC) and 100(SC)
Front cover
Note
When encasing multiple inverters, install them in parallel as a
cooling measure.
When using the inverters at the surrounding air temperature of
40°C or less, the inverters can be installed without any clearance
between them (0cm clearance). When surrounding air
temperature exceeds 40°C, clearances between the inverters
should be 1cm or more (5cm or more for the FR-D740-120(SC) or
higher).
Install the inverter vertically.
-
-
D740
036
Represents
the rated
current
Rating plate
Inverter model
Input rating
Output rating
Serial number
Country of origin
Wiring cover
- EC
Symbol
Model
Sink-logic safety terminal
None
SC
Source-logic safety terminal
FR--D740-036-EC
MODEL
INPUT
XXXXX
OUTPUT XXXXX
SERIAL
MADE IN JAPAN
FR-D720S-008(SC) to 042(SC)
Front cover
10cm or more
10cm or more
INVERTER
PASSED
SAMPLE
Wiring cover
1
Advertisement
