Technical Support - Gechter HKPL-DS Translation Of The Original Operating Manual

9.2

Technical Support

The following maintenance instructions are only intended as rec-
ommendations by the manufacturer!
The press operator is required to document maintenance-related
observations and to expand and specify the maintenance in-
structions in this operating manual accordingly!
The maintenance instructions for purchased parts are also to be
observed!
The following sections describe the maintenance work required for optimal and
fault-free device operation.
If increased wear is identified during regular checks, the required maintenance
intervals are to be shortened according to the actual signs of wear.
Please contact the company GECHTER Werkzeug- und Maschinenbau GmbH for
questions about maintenance work and intervals.

Please refer to the "Identification" chapter for how to contact the custom-
er service of Gechter GmbH!
Observe the following specified time intervals for inspection and maintenance:
Interval
if necessary
Daily
Weekly
Monthly
Annually
National laws or provisions of more frequent inspection and/or
maintenance of the device are to be observed.
–
HKPL-DS Translation of the original operating manual
Service and maintenance
Maintenance work
: clean
Press
:
Press carriage Lubricate the prism guide
:
Press carriage Lubricate the prism guide (slid-
ing guide oil Shell T 68 or equivalent)
:
Pneumatics Check for leaks
Maintenance unit: Check the condensate level,
empty if necessary;
Check the oil level, top off with oil if necessary
(Use the type of oil according to the maintenance
unit instructions)
Check the sound absorber, replace if necessary
:
Cylinder Replace the seal set
Force sensor: Calibrate
87
9
Personnel
Operator
Technically
trained person-
nel
Technically
trained person-
nel
Technically
trained person-
nel
Gechter GmbH