Table of Contents
Advertisement
4.2.3
Fastening the press
Fasten the press with hexagon bolts, washers and nuts through the bores on
the press base feet.
Fastening the press
4.2.4
Assembling the hand lever
Screw the hand lever into the receptacle of the universal shaft on the
right side of the device.
Tighten the hexagon socket screws with the Allen key.
Use an open-end wrench to tighten the hand lever with lock nut against
the receptacle.
Tighten the hand lever in the lever clamping with an Allen key.
Assembling the hand lever
1
2
–
HKPL-DS
Translation of the original operating manual
Installation
1
Lever
Lock nut
2
3
3
Hexagon socket screw
21
4
Advertisement
Table of Contents
