Accessories; Precision Fine Adjustment Pfe - Gechter HKPL-DS Translation Of The Original Operating Manual

8.2

Accessories


Only use accessory parts from the press manufacturer Gechter GmbH!

Please refer to the "Appendix" chapter for an exact breakdown of the ac-
cessory parts!

Refer to the "Identification" chapter for contact options!

Please refer to the chapter "Spare parts and ordering" for information
about the ordering process of accessory parts!
8.2.1

Precision fine adjustment PFE

The precision fine adjustment PFE cannot be used with the
MS/MC options!
Risk of injury from pneumatic energy
When working on the press, e.g. changing tools, the press must
be disconnected from the compressed air supply by switching the
switch-on valve.
Disconnect the connecting coupling between the maintenance
module and main pneumatic line.
Carry out the following activities:

Open the door on the front side of the guide unit with the key.
Open door
–
HKPL-DS Translation of the original operating manual
Setup and accessories
69
8