Table of Contents
Advertisement
7.3
Relocate the press
Carry out the following work steps if the press is to be relocated!
Empty:
▪
▪
Disconnection of the energy sources:
▪
▪
Relocate:
▪
▪
▪
▪
IMPORTANT
Observe the transport information in the "Transport process" chapter!
7.4
Storing the system
The storage facility must be cool and dry in order not to favor corrosion of in-
dividual parts of the system.
The room temperature of the storage facility must constantly be between 10°C
and 25°C. The humidity of the storage room may not exceed 50%.
Pack the press parts so that they are not damaged by external influences
during storage!
If necessary, use cardboard and other packaging material!
Secure the press parts from accidental tipping over and instability!
–
HKPL-DS
Translation of the original operating manual
Decommissioning
Drain condensate at the maintenance module
Remove parts
Power supply line (option)
Air supply line
Cover the press to protect it from contaminants
Slightly oil the bare metal parts to protect them from corrosion
Store the press on transport pallets
Fasten moving parts
50
7
Advertisement
Table of Contents
