Technical Support - Gechter HKPE Series Translation Of The Original Operating Manual

9.2

Technical Support

The following maintenance instructions are only intended as rec-
ommendations by the manufacturer!
The press operator is required to document maintenance-related
observations and to expand and specify the maintenance in-
structions in this operating manual accordingly!
The maintenance instructions for purchased parts are also to be
observed!
The following sections describe the maintenance work required for optimal and
fault-free device operation.
If increased wear is identified during regular checks, the required maintenance
intervals are to be shortened according to the actual signs of wear.
Please contact the company GECHTER Werkzeug- und Maschinenbau GmbH for
questions about maintenance work and intervals.

Observe the following specified time intervals for inspection and maintenance:
Interval
if necessary
Daily
National laws or provisions of more frequent inspection and/or
maintenance of the device are to be observed.
–
Hand toggle presses Translation of the original operating manual
Service and maintenance
Please refer to the "Identification" chapter for how to contact the custom-
er service of
Gechter GmbH!
: clean
Press
Press carriage
Press carriage
ing guide oil Shell T 68 or equivalent)
Maintenance work
:
Lubricate the prism guide
:
Lubricate the prism guide (slid-
44
9
Personnel
Operator
Technically
trained person-
nel