Tighten the clamping screws of the guide unit to the specified tightening
torque.
Remove the thread play by turning the threaded spindle counter-
clockwise.
Secure the threaded spindle from twisting with the clamping screw.
Switch on the switch-on valve.
Tighten the clamping screws
1
Adjust the knurled screw to the desired holding time again at the delay
valve.
Knurled screw of the delay valve
1
–
HKPL-DS
Translation of the original operating manual
Setup and accessories
Clamping screw of the threaded spin-
dle
Delay valve
1
2
Switch-on valve
2
Clamping screw of the guide unit
1
63
8