Gechter HKPL-DS Translation Of The Original Operating Manual page 2

i
Information
This operating manual is part of the technical documentation of the press according to the
EC press guideline.
This operating manual complies with the "Directive 2006/42/EC of the European Parliament
and the Council on the Approximation of the Legal and Administrative Provisions of the Mem-
ber States Relating to Presses" (Press Directive), appendix I, point 1.7.4.
This operating manual is aimed at those responsible in the plant who must hand this over to
the personnel responsible for the installation, connection, use and maintenance of the press.
The responsible persons must ensure that the information contained in the operating manual
and in the accompanying documents has been read and understood.
The operating manual must be stored in a known and easy-to-access location and must also be
consulted even in cases of minor doubt.
The manufacturer assumes no liability for damage to people, animals or objects as well as the
press itself, which is caused from improper use, neglect or insufficient observance of the safety
criteria contained in this operating manual or that is caused by modifying the press or using
unsuitable spare parts.
The copyright for the operating manual lies exclusively with
Gechter GmbH Werkzeug- und Maschinenbau
Ostring 3
90587 Obermichelbach
GERMANY
or with their legal successor.
This operating manual may only be duplicated or passed on to third parties with written ap-
proval. This is also the case if only excerpts of the operating manual are copied or forwarded.
The same conditions exist for passing on the operating manual in digital form.