Table of Contents
Advertisement
Risk of crushing and hand injury
There is a risk of crushing your hand and fingers during setup
work when the tool or press cylinder is lowered.
Have setup work only carried out by professionals.
The door on the front side of the guide unit must always be
closed when working with the press.
Before operating the hand lever, ensure that the tool area is
clear.
Do not hold your hand in the tool area during a test stroke.
When working on the press, e.g. changing tools, the press must
be disconnected from the compressed air supply by switching the
switch-on valve.
The press must be retrofitted when changing the types.
Observe the individual station descriptions in the chapter "Installation and
Function".
For the retrofitting, use the corresponding tool diagrams with illustrations
of the components to be retrofitted.
Connect the components or accessory parts to be retrofitted in a manner
that is identical to the normal installation.
Observe the special handling requirements and instructions in the "Instal-
lation" chapter.
–
HKPL-DS
Translation of the original operating manual
Setup and accessories
53
8
Advertisement
Table of Contents
