Table of Contents
Advertisement
Since the press has a time control for the power stroke, this
work step must be carried out quickly, since the press otherwise
automatically moves back into the basic position. In order to
possibly lengthen the holding time in the lower dead center, the
knurled screw of the delay valve must be turned to the right.
Risk of crushing and hand injury from dropping guide unit
Never unscrew the clamping screws of the guide unit.
Loosen the clamping screws of the guide unit with a ring wrench, but do
not unscrew it all the way.
Loosen the clamping screw at the threaded spindle with an Allen screw,
but do not unscrew it all the way.
Loosen the clamping screws
1
–
HKPL-DS
Translation of the original operating manual
Setup and accessories
Clamping screw of the threaded spin-
dle
1
2
2
Clamping screw of the guide unit
61
8
Advertisement
Table of Contents
