T-shaped sliding blocks are available to clamp the lower die.
For 4.8 and 12 kN HKPL 1x DIN 650, M8x10 middle symmetrical.
For 13 and 20 kN HKPL 2x DIN 650, M8x10 middle symmetrical.
For 33, 45 and 56 kN HKPL 2x DIN 650, M8x12 middle symmet-
rical.
Fasten the tool to the press table.
Press table
Close the door, remove the key and store safely.
Close the door
–
HKPL-DS
Translation of the original operating manual
Setup and accessories
59
8