Table of Contents
Advertisement
Drive in the new shear clamping stud flush in front with a punch.
The hand lever must be play-free and easy to operate.
Drive in the shear clamping stud
Danger of injury from the hand lever jumping up!
Hold on to the hand lever tightly during the entire work cycle.
Release the hand lever once this has reached the uppermost po-
sition.
Connect the return spring in the half-length taper grooved pin by means
of the binding cord or the cable.
Connect the return spring
–
HKPL-DS
Translation of the original operating manual
Faults
105
10
Advertisement
Table of Contents
