Installation - Gechter HKPL-DS Translation Of The Original Operating Manual

4.

Installation

Observe the basic safety instructions in the "Safety Instructions"
chapter.
In addition, observe all safety instructions in the manufacturer
documentation found in the appendix.










–
HKPL-DS Translation of the original operating manual
Installation
Visually inspect that all sling gear is undamaged and in good condition!
Prevent ropes and lifting straps from chafing on sharp edges and corners
by using special aids, such as intermediate layers of soft material, pro-
tected corners, wooden corner pieces!
Screw in the full length of hooks and eye bolts!
Do not repair or use any damaged or bent hooks and eye bolts!
Do not attach any loads from which any liquids that may be present
could leak during transport!
Check the delivered parts for completeness, damage or other abnormali-
ties!
During transport, observe the valid safety and accident prevention regu-
lations (BGV D8, D6)!
Ensure adequate ventilation at the installation site!
If you have questions about transport, setup and installation of the
press, contact the company Gechter GmbH Werkzeug- und Maschinen-
bau!
Refer to the "Identification" chapter for contact options!
18
4