Reasonably Foreseeable Misapplication - Gechter HKPL-DS Translation Of The Original Operating Manual

1.2

Reasonably Foreseeable Misapplication

Reasonably foreseeable misapplication, which may result in dangers to the us-
er, third party or to the press, for all operating modes is constituted by:
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Risk of injury from unauthorized changes
Dangers result from unauthorized changes to the press or to the
control cabinet and from the use of spare parts from other manu-
facturers.
Only original spare parts and wear parts from the manufacturer
may be used. Do not perform any changes, additions or conver-
sions without approval from the company Gechter GmbH
Werkzeug- und Maschinenbau.
–
HKPL-DS Translation of the original operating manual
Identification
using the press and its electrical equipment contrary to the intended
use
feeding components whose shape deviates from the shape intended
for the press
operating the press outside of the physical application limits described
in the "Commissioning / operation" chapter
changing the operating pressure to deviate from the value specified in
the technical data
changing the control software without prior consultation with the com-
pany Gechter GmbH Werkzeug- und Maschinenbau
changes to the press as well as additions and conversions without pri-
or consultation with the company Gechter GmbH Werkzeug- und Mas-
chinenbau
operating the press contrary to the provisions of the operating manual
with respect to safety instructions, installation, operation, mainte-
nance and repair, setup and faults
bypassing or decommissioning safety and protective precautions on
the press
operating the press in the event of obvious faults
repair, cleaning and maintenance work without switching off the press
2
1