Decommissioning; Shutting Down The Press (Longer Period Of Time); Relocate The Press - Gechter HKPE Series Translation Of The Original Operating Manual

7.

Decommissioning

Observe the safety chapter
Observe the basic safety instructions in the "Safety Instructions"
chapter.
In addition, observe all safety instructions in the manufacturer
documentation found in the appendix.
7.1

Shutting down the press (longer period of time)


Empty:

Storage:




7.2

Relocate the press


Empty:

Relocate:




IMPORTANT
Observe the transport information in the "Transport process" chapter!
–
Hand toggle presses Translation of the original operating manual
Decommissioning
Carry out the following storage measures if it is intended to decommis-
sion the press for longer than 4 weeks!
Remove parts
Cover the press to protect it from contaminants
Slightly oil the bare metal parts to protect them from corrosion
Store the press on transport pallets
Fasten moving parts
Carry out the following work steps if the press is to be relocated!
Remove parts
Cover the press to protect it from contaminants
Slightly oil the bare metal parts to protect them from corrosion
Store the press on transport pallets
Fasten moving parts
30
7