Extreme Networks BlackDiamond 10808 Installation Manual page 93

Table 16 describes the LED activity on the BlackDiamond 10K series I/O modules.
The BlackDiamond 10K series switch comes with eight blank front panels already installed. Use a blank
front panel to fill slots not occupied by I/O modules or switch management modules. For information
about how to install a blank front panel, see
You can insert a BlackDiamond 10K series I/O module at any time, without causing disruption of
network services. Complete the action of inserting a BlackDiamond 10K series I/O module in a
reasonable time frame. Be sure to insert the module completely to avoid partial connection of backplane
connectors.
You need the following tools and equipment to install an I/O module:
ESD-preventive wrist strap(provided)
# 1 Phillips screwdriver
I/O module
Appropriate type of cable for the I/O module you plan to install
"Installing a Blank Front Panel" on page 97.
93