Extreme Networks BlackDiamond 10808 Installation Manual page 78

You install the MSM in one of the designated (lettered) slots in the BlackDiamond 10K system chassis.
Figure 38 shows the front view of the MSM.
The MSM consists of a printed circuit board mounted on a metal panel that acts as the insertion vehicle
in a BlackDiamond 10K series switch. The module carrier also includes ejector/injector levers and
captive retaining screws at each end of the module front panel.
The MSM has the following ports:
Console port—Used to connect a terminal and perform local management.
Management port—Used to connect an Ethernet cable directly from your laptop into the
management port to view and locally manage the switch configurations.
Modem port—Used to connect a modem for remote access to the CLI.
Compact flash—Use to insert an external compact flash memory card into this port. (See
Compact Flash Memory Card" on page 45
compact flash cards.).
Module status LEDs
Module reset button
Management port
Console port
Compact flash
EX_003
for more information on Extreme Networks-supported
"External
78