Extreme Networks BlackDiamond 10808 Installation Manual page 112

Follow these steps to ensure proper mid-mount racking for the BlackDiamond 8810 chassis:
1 Locate the 19" helper bracket that is shipped with the chassis.
2 Mount the 19" helper bracket onto the system rack using four mount screws as shown in Figure 57.
EX_008
EX_086
3 Lift the back of the empty chassis onto the 19" helper bracket.
4 Slowly guide the chassis onto the system rack until the chassis is securely seated.
5 Attach the right and left side of the mid-mount kit onto the system rack using a #2 Phillips
screwdriver to tighten the mount screws in the available open slots.
6 Remove the 19" helper bracket from the system rack once the chassis is secured.
112