Extreme Networks BlackDiamond 10808 Installation Manual page 46

You do not need to power off the system or remove the MSM from the chassis to install an external
compact flash memory card.
You need the following tools and equipment to install a compact flash memory card:
ESD-preventive wrist strap (provided)
Industrial-grade compact flash memory card
To install the memory card, do the following:
1 Attach the ESD-preventive wrist strap to your wrist and connect the metal end to the ground
receptacle that is located on the top-left corner of the switch front panel.
2 Locate the compact flash slot on the MSM, as shown in
Module status LEDs
Module status LEDs
Module reset button
Management port
Console port
Compact flash
EX_003
Figure 13.
ERR
SYS/STA
ENV
MSTR/DIAG
Mini-GBIC
fiber ports
Compact flash
Console port
MGMT port
A
D
R
ASP038
46