Extreme Networks BlackDiamond 10808 Installation Manual page 86

Figure 40 shows the G60T module.
The G60T module has 60 autosensing 10/100/1000BASE-X ports that use standard RJ-45 connectors. If
you have one MSM installed, all ports on the G60T module are switched through that MSM. If you
have two MSMs installed, the top 30 ports on the G60T module are switched through the MSM in slot
A, and the bottom 30 ports are switched through the MSM in slot B during normal operation.
The default configuration of the G60T module is as follows. All ports:
Are added to the default VLAN as untagged
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
Operate in autonegotiation mode
The G60T module has the following LEDs:
Module status
Port status
Port speed
For information about the LEDs and their activity on the G60T module, see
page 93.
Module status LEDs
RJ-45
connector
ports
EX_004
"I/O Module LEDs" on
86