Extreme Networks BlackDiamond 10808 Installation Manual page 111

The following tools and equipment are required for assembling the BlackDiamond 8810 mid-mount kit
and racking the BlackDiamond 8810 chassis:
ESD-preventive wrist strap
#2 Phillips screwdriver
19" helper bracket
BlackDiamond 8810 mid-mount kit
BlackDiamond 8810 chassis
A minimum of two people to help install the chassis into the rack
Follow these steps to assemble the BlackDiamond 8810 mid-mount kit:
1 Using two or more people, place the empty chassis in an upright position on a secure flat surface.
2 Attach the right and left mid-mount bracket to each corresponding side of the chassis using eight
mount screws as shown in Figure 56.
Mid-Mount
Bracket
ASP034
111