Raytheon Anschütz NautoPilot 5000 Series Operator's Manual page 99

NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
Notes on the heading source selection:
Gyro/GPS
If only one Gyro Compass is connected, this compass acts as the active
heading source.
If several Gyro Compasses are connected within a navigation system, the compass
with the better performance or with an ascertained sequence is selected for the
task.
The performance or sequence is ascertained via an external system for navigation
data evaluation and distribution.
GPS Compasses are handled like Gyro
Compasses. The selected GPS Compass is
displayed:
Gyro: GPS 2
(if there are more than one GPS Compass)
Magnet
If only one magnetic compass is connected, this compass acts as the active
heading source.
If several magnetic compasses are connected within a navigation system, the
compass with the better performance or with an ascertained sequence is selected
for the task.
The performance or sequence is ascertained via an external system for navigation
data evaluation and distribution.
System
If this check box is activated, a compass is selected according to the conditions for
the selection of a Gyro Compass and a magnetic compass.
The sequence of selection is: Gyro/GPS Compasses first, then magnetic
compass. The sequence is Gyro Compasses first, GPS Compasses second and
magnetic com- passes third.
10000001052
Edition: 003
83