Raytheon Anschütz NautoPilot 5000 Series Operator's Manual page 186

NautoPilot Operator Unit
8 Annex
Alert Title
Alert Description
TCS STOPPED
MAG HDG SELECT-
ED: SELECT GYRO
HEADING
TRCK-
CRS-HDG.DIFF
TAKE HELM TO
KEEP COURSE
STEADY
WP APPROACH
APPROACH NEXT
WAYPOINT
AP NOT ACTIVE
AUTOPILOT NOT
ACTIVE: ACTIVATE
HDG CONTROL
APPROACH WP
APPROACHING
NEW WAYPOINT
CC UNAVAIL.
NO POSITION:
CHECK POS
SENSORS
GYRO NOT SEL
NO TCS OR
CC WITH MAG:
SELECT GYRO
HEADING
HCS UNAVAIL.
NO HEADING:
CHECK HDG
SENSORS
MISSING WP
MISSING WAY-
POINTS
10000001052
Catego- Escala- Possible Cause
ry tion
Priority
Warning as Track control inter-
Alarm rupted, magnetic
B
heading source se-
to BN-
lected.
WAS
(30 s)*
Warning as Difference between
Warning actual heading and
A
leg course exceeds
operator adjusted off
course limit.
Warning as Track control in
Warning accordance with
A
IEC62065:2002 con-
figured. Next way-
point in 3 min.
Caution Heading control has
to be active to acti-
B
vate Track control
Caution none
B
Caution none No position infor-
mation available so
B
Course control is not
usable.
Caution none TCS may not be used
in when a magentic
B
heading source is se-
lected
Caution none Activation of Track or
Course control while
B
no speed is avaiable
- activation not possi-
ble.
Caution none
B
Remedy
Select gyro heading
source.
Check surroundings,
high drift or other dis-
turbances present.
Activate Heading con-
trol
Check position sen-
sors.
Select Gyro compass
as heading source
Edition:001