Raytheon Anschütz NautoPilot 5000 Series Operator's Manual page 77

Figure 28/17 Softkeys for changing selected rudder parameters.
Figure 28/18 Softkey for switching back to the previous display, without a
Figure 28/19 Softkey for changing/entering the Track Econ parameter to in-
Figure 28/20 For Adaptive mode only and not for NP 5100.
Figure 28/21 Softkey for changing/entering the counter rudder parameter
Figure 28/22 Softkey for changing/entering the rudder parameter (see also
Figure 28/23 Softkey for changing/entering the yawing parameter (see also
Edition: 003
Changes must be acknowledged with SET (a small icon is
displayed after a change has been made, see Figure 29).
transfer of changed values.
fluence rudder activity (see section 1.3.8).
Softkey for changing/entering the ship load condition
parameter (see also section 1.3.4). Value range: 10% to 100%
(in increments of 10%).
Use the + and- softkeys to make a change.
Changes must be acknowledged with SET (a small icon is
displayed after a change has been made,
see Figure 29).
(see also section 1.3.3). Value range: 0 to 9
(in increments of 1).
Use the + and- softkeys to make a change.
Changes must be acknowledged with SET (a small icon is
displayed after a change has been made, see Figure 29).
section 1.3.2). Value range: 1 to 9 (in increments of 1).
Use the + and- softkeys to make a change.
Changes must be acknowledged with SET (a small icon is
displayed after a change has been made, see Figure 29).
section 1.3.1). Value range: 1 to 6 (in increments of 1).
Use the + and- softkeys to make a change.
Changes must be acknowledged with SET (a small icon is
displayed after a change has been made, see Figure 29).
61
NautoPilot® 5000 Series
102-890.NG001-NG003
Function
Operator Manual
10000001052