Raytheon Anschütz NautoPilot 5000 Series Operator's Manual page 190

NautoPilot Operator Unit
8 Annex
Alert Title
Alert Description
CHECK DR
CHECK DEAD
RECKONING DRIFT
SETTINGS
CRS APPROACH
COURSE AP-
PROACHING
NO BACKUP POS
NO BACKUP
POSITION USING
DEAD RECKONING
POS MON SOG
DEAD RECKONING
WITH SOG: CHECK
SPEED SENSOR
Tab. 15: Alerts Track Control Old
Alert Title
Alert Description
CHANGE TRACK
CHANGING TRACK
TO 000°
CHANGE TRACK
CHANGING TRACK
TO 000°
NEW CRS 30S
COURSE CHANGE
IN 30 SECONDS
10000001052
Catego- Escala- Possible Cause
ry tion
Priority
Caution none Position monitor for
Course control uses
B
DR. Default settings
used for drift and set.
Caution none Activation of Course
control or Set course
B
change in course
control.
Caution none Dead reckoning is
used for position
B
monitoring.
Caution Position monitor uses
a dead reckoning po-
B
sition for comparison.
Catego- Escala- Possible Cause
ry tion
Priority
Alarm to BN- Only active if AP
WAS is configured for
A
IEC62065:2002. Ac-
tual Course change
warning (30 s prior to
WOL)
Alarm as Only active if AP
Alarm is configured for
A
IEC62065:2002. Ac-
to BN-
tual Course change
WAS
warning (WOL al-
ready passed)
Warning Track 62065:2002,
actual track change
A
warning.
(30 s)*
Remedy
Check settings for po-
sition monitor
None necessary.
Remedy
Edition:001