Raytheon Anschütz NautoPilot 5000 Series Operator's Manual page 69

Figure 22/9
Figure 22/10 Softkey for switching between night and day modes.
Figure 22/11 Softkey for selecting displays with other content:
Figure 22/12 Softkey for showing and editing general settings for control functions
Figure 22/13 Softkey for changing the value for a heading change performed
Figure 22/14 Alphanumerical information about the mode for heading changes
Figure 22/15 Display that shows the rate of turn or the radius value for a
Figure 22/16 Bar that indicates the actual rudder position.
Figure 22/17 Softkey for changing the value for a heading change performed
Figure 22/18 Softkey for switching between Economy mode and Precision
Figure 22/19 Softkey for switching between radius controlled heading changes
Edition: 003
Resolution icon.
Softkey to switch the resolution of the set heading value
between 1 and 1/10.
- HDG/Rudder plot: displays heading versus rudder position in
a recorded graphic mode.
- Track Data (- not in Heading Control - ): displays a track in
a recorded graphic mode.
- NP 5000 Actual Rudder: displays the actual rudder position in
a graphic mode.
- Acceleration Monitor: displays actual acceleration values in
an alphanumeric display (if configured).
- Position Monitoring: displays all available satellites for
position calculation in a graphical mode (if configured).
- Ship Data: displays all essential ship
data (set during configuration).
of the Autopilot:
-- Limits
- Values
-- Parameter
(independent from the configured values but limited by those values)
either by a rate of turn function or by a radius function to a higher
value.
Changed value must be acknowledged (SET).
(selectable by the softkey Rad/RoT (Figure 22/19)
heading change.
either by a rate of turn function or by a radius function to a lower
value.
Changed value must be acknowledged (SET).
mode (- not for NP 5100 - ).
and rate of turn controlled heading changes.
53
NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052