Raytheon Anschütz NautoPilot 5000 Series Operator's Manual page 50

NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
Procedure of the Track Change Maneuver
An alert is displayed at the top bar of the display (see section 7).
Please note: If this warning is not acknowledged it becomes an Alarm. With 3 pulses acoustical sound,
red and blinking message bar and the below mentioned message about the 30 seconds- warning is
dropped.
An alert is displayed at the top bar of the display (see section 7).
Track change maneuver starting. An alert is displayed at the to bar of the display (see section 7).
10000001052
WOP IN x MIN OR LESS
Track
2 pulses
WOP IN x MIN
WOP IN 30 SECOND OR LESS
2 pulses
WOP IN 30 SECOND
Changing Track xxx
Changing Track xxx
Chang. Track xxx
Indications
34
Comment/Notes
x minutes before the WOP.
The approach time is transmitted from
the ECDIS to the Autopilot.
The LED ACK flashes.
At the top bar of the display the message
is displayed in long text.
After acknowledgement the LED is alight
constant and the message text changes
to short text.
30 seconds before the track change
maneuver is started.
After acknowledgement the LED is alight
constant and the message text changes
to short text.
During the track change maneuver, the
LED ACK is alight constant.
Approach maneuver to a new track
ended. An alert is displayed at the top
bar of the display.
As soon as the ship reaches the new
track this message must be
acknowledged.
Edition: 003