Raytheon Anschütz NautoPilot 5000 Series Operator's Manual page 127

Preselected Heading
Please note:
- It is necessary to observe the Autopilot control function after a heading change.
Edition: 003
Heading Control mode is active.
The mode is displayed at the top right corner of the display
(Heading Ctrl.).
Turning the rotary knob will change the preselected heading
value.
Please note: After approx. 15 seconds of inactivity from
rotary knob, the primary heading value is displayed again.
This value is displayed in italic and colors are inverted.
125.8
The SET LED (near the button) will flash (request to press
the SET button).
Pressing the rotary knob transmits the preselected value to
the controller as the new set heading (this procedure is
similar to that for a Direct heading change).
Set Heading
The value is now displayed in non- italics and normal colors.
125.8
The SET LED (near the button) will be off.
111
NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052