Raytheon Anschütz NautoPilot 5000 Series Operator's Manual page 87

The calculated cross acceleration limit is displayed on the fly (see position 20).
Additionally (during the input of the respective value) an alert is indicated in the
Acceleration Monitor page if this value could lead to an alert (by a small attention
sign behind the respective line).
Radius or rate of turn and speed should be adjusted in that manner, as they will
lead (according to experience) to a safety sea trial.
After the values are input (procedure to press SET) and the warning is enabled (see
position 17) an alert is triggered on exceeding this acceleration limit and indicated
by an acoustical sound and an orange yellowish warning bar.
It is advantageous to input a percentage value (see position 16). This percentage
value generates an alert before the maximum tolerable acceleration occurs.
Edition: 003
71
NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
10000001052