Magnum Energy ME-ARC Owner's Manual page 37

http://www.wholesalesolar.com/inverter_systems.html
Rotate the Select knob to access "Lock SETUP" and "Change PIN" options.
Unlock SETUP - When "PIN = 0***" is displayed, enter the correct PIN
number and "SETUP Unlocked" will be displayed indicating the SETUP button
is now unlocked. Press the SETUP button to access the SETUP menus.
Lock SETUP - When "SETUP Unlocked" is displayed rotate the Select knob
to "Lock SETUP" and press Select. "SETUP Locked" will be displayed and the
SETUP button is now locked.
Change PIN - When "SETUP Unlocked" is displayed, rotate the Select knob
to "Change PIN", and then press Select. "PIN = xxxx" (xxxx = the current PIN
number set) will now be display and is ready to accept a new PIN number.
Example - You have set your PIN number to "PIN = 1000". When Change PIN
is selected "PIN = 1000" will be displayed. The first digit in this example (the
"1") will be blinking. Turn the Select knob, change the first digit to the new
PIN number you have selected. Continue to change the remaining 3 digits
until you have selected your new PIN number.
Info: There are some SETUP menus that may be desirable to ac-
cess without giving access to the PIN number to users. This is made
possible in ME-ARC with the FAVS button. Before setting the PIN
number, enter the desired SETUP menus in the FAVS button. Once
the SETUP menus have been entered in the FAVS button the PIN
number can now be entered and the SETUP button will be locked.
The SETUP menus in FAVS will still be accessible without having to
enter the PIN number. See pages 6-7 for more information on the
FAVS button.
• TECH: 06 Ext Control: External Control is a read only menu. Magnum
Energy has adopted an "open protocol" policy which allows third party
firmware companies to control certain functions of the inverter/charger. This
menu displays if any external software is controlling the remote. This menu
is designed to help Magnum Energy tech support personnel determine if the
inverter/charger is operating normally, or being controlled by a third party.
No Ext Control - This menu means that no third party network device is
controlling the ME-ARC remote.
Yes Ext Control - This menu means that a third party network device is
controlling one of the allowable functions of the ME-ARC remote. The
function(s) that are being controlled by a third party will be displayed as a
number. This number can be used by Magnum Tech Support to determine
what code is controlling the ME-ARC remote.
• TECH: 07 Load Defaults - This menu restores all settings on the
inverter/charger and any settings on accessories that are networked. To
restore, press and hold the rotary SELECT knob for 5 seconds. After the
default settings have been restored, the display will show DEFAULTS LOADED.
Refer to the menu map on pages 34-37 for default values.
Info: For information on the factory default settings for any net-
worked accessory; refer to the owner's manual for that accessory.
© 2010 Magnum Energy, Inc.
3.0 Setup
33