Magnum Energy ME-ARC Owner's Manual page 36

http://www.wholesalesolar.com/inverter_systems.html
3.0 Setup
Example: The inverter has it's fi rst fault today (D-) which is a Low Battery
Fault at 10PM and then the next day (D-1) a High Battery Fault at 11PM. The
Inv Fault History will display in order H1 = fi rst fault in history, H2 = second
fault in history etc.
H1 Low Battery
H1 D- 10:00PM
H1 Inverting
H1 22 VDC 18A
H1 BTS: 60F
H1 Tfmer: 65F
H1 FETs: 65F
• TECH: 05 SETUP PIN: This menu sets the password, locks and unlocks
the "SETUP" button. The SETUP button can be locked with a password to
avoid an unauthorized change.
• Why should I use the PIN feature? This feature is useful when the
operation of the inverter has been set up by an experienced user or installer.
Setting the PIN prohibits an inexperienced user from changing settings that
might result in an undesirable operation.
Default setting: PIN = 0000
SETUP Unlocked - The SETUP button is unlocked, or has not been set for
the first time and the SETUP menus are accessible.
When entering the menu if the PIN has not been set, "PIN = 0000" with the
first "0" flashing will be displayed. When "PIN = 0000" is displayed, press
the Select knob. The first "0" will be flashing, rotate the Select knob to the
desired number 0-9 and press Select. Continue to set the remaining 3 digits
until the desired PIN number is displayed. After pushing the Select for the
last digit, the PIN is set and "Unlock SETUP <" is displayed.
When "PIN = 0***" is displayed a PIN has been entered, and the correct PIN
must be entered in order to access the 05 SETUP PIN and SETUP buttons. If
the incorrect PIN number is entered, "Invalid PIN" will be displayed. There is no
limit on how many attempts can be made to enter the correct PIN number.
To enter the correct PIN number rotate the Select knob to the correct digit
and then press Select. Continue to set the remaining 3 digits until the correct
PIN number is entered. After pushing the Select for the last digit "Unlock
SETUP <" will be displayed.
Info: If the correct PIN has been forgotten you may override the
entered PIN. In menu 05 SETUP PIN when "PIN = 0***" is displayed,
press and hold the Select knob until "PIN = 0000" is displayed. Enter
a new PIN number as described in 05 SETUP PIN above.
32
H2 High Battery
H2 D-1 11:00 PM
H2 Bulk Charge
H2 32 VDC 80A
H2 BTS: 60F
H2 Tfmer: 95F
H2 FETs: 80C
© 2010 Magnum Energy, Inc.