Tape Roll Diameter; Tape Application Leg Length - Standard; Tape Application Leg Length - Optional - 3M 40800 Instructions And Parts List

4-SPECIFICATIONS (continued)
Specifi cations

6. Tape Roll Diameter

Up to 405 mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
7. Tape Application Leg Length – Standard
70mm ± 6 mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See "Removing Taping Heads Procedure – Changing the Tape Leg Length")
8. Box Board
Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C fl ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)
9. Box Weight and Size Capacities
A. Box Weight, fi lled: 5 lbs.–65 lbs. [2.3 kg–29.5 kg]. Contents must support fl aps.
B. Box Size:
Length:
Width:
Height:
*Boxes narrower than 200mm [8 inches] may require more frequent belt replacement because of limited
contact area.
** Minimum/maximum box height dimensions are with machine at factory setting. To accommodate
smaller or larger boxes, machine upper taping head frame and/or outer column assemblies can be re-
positioned as described in the "Special Set-Up Procedure" section of this manual. Refer to chart below
for box height range desired and then to illustration indicated for machine adjustments necessary.
Minimum*
mm [Inches] mm [Inches]
120 [4-3/4] 645 [25-1/2]
175 [6-7/8] 700 [27-5/8]
230 [9] 755 [29-3/4]
Note: Shaded area on chart indicates machine setting as shipped from factory.
700rks-NA
Minimum
150mm [6.0 inch]
175mm [7.0 inch]*
120mm [4.75 inch]**
Minimum/Maximum Box Height Combinations
Maximum Refer to
Illustration
A
B
C
® fi lm tapes.)
Maximum
Unlimited
645mm [25.5 inch]
645mm [25.5 inch]
Minimum
mm [Inches] mm [Inches]
280 [11-1/8]
275 [10-7/8]
385 [15-1/8]
15
Maximum Refer to
Illustration
810 [31-7/8] D
805 [31-5/8] E
910 [35-7/8] F
2010 January