Specifi Cations - 3M 40800 Instructions And Parts List

Specifi cations
1.
Tape:
For use with Scotch
2.
Tape Width:
48mm [2 inches] minimum to 72mm [3 inches] maximum.
3.
Tape Roll Diameter:
Up to 405mm [16 inches] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
4.
Tape Application Leg Length - Standard:
70mm ± 6mm [2-3/4 inches ±1/4 inch]
Tape Application Leg Length - Optional:
50mm ± 6mm [2 inches ± 1/4 inch] (See "Adjustments – Tape Leg Length.")
5.
Box Size Capacities:
For use with center seam regular slotted containers.
Minimum
Length –
Height –
Width –
When upper and lower taping heads are used on "3M-Matic" case sealers, refer to the respective instruction
manual specifi cations for box weight and size capacities.
6.
Operating Rate:
Conveyor speeds up to 0.5 m/s [100 feet per minute].
7.
Operating Conditions:
Use in dry, relatively clean environments at 5° to 40° C [40° to 105° F] with clean dry boxes.
Important – Taping heads should not be washed down or subjected to conditions causing moisture
condensation on components.
8.
Taping Head Dimensions:
Length
Height
Width
Weight
AccuGlide 3 Taping Head - 3"
pressure-sensitive fi lm box sealing tapes.
®
150mm [6 inches]
120mm [4-3/4 inches] (most "3M-Matic" Case Sealers)
90mm [3-1/2 inches] (with optional 2 inch leg length)
150mm [6 inches]
– 442 mm [17 3/8 inches]
– 648 mm [25 1/2 inches] (with tape drum)
– 130 mm [5-1/8 inches] (without mounting spacers)
– Packaged: 8.2 kg [18 lbs.] Unpackaged: 7.3 kg [16 lbs.]
fi lm tapes.)
®
6
Maximum
Unlimited
Limited by
Case Sealer
2009 February