3M 40800 Instructions And Parts List page 71

700rks Random Case Sealer, Type 40800
Frame Assemblies
To Order Parts:
1. Refer to fi rst illustration, Frame Assemblies, for the Figure Number that identifi es a specifi c portion of the
machine.
2. Refer to the appropriate Figure or Figures to determine the parts required and the parts reference number.
3. The Parts List that follows each illustration, includes the Reference Number, Part Number and Part
Description for the parts on that illustration.
Note – The complete description has been included for standard fasteners and some commercially
available components. This has been done to allow obtaining these standard parts locally, if desired.
4. Order parts by Part Number, Part Description and Quantity required. Also include the model/machine name,
machine type, and serial number that are located on the identifi cation plate.
5. Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information" for
replacement parts ordering information.
Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are
available only on special order. Contact 3M/Tape Dispenser Parts to confi rm item availability.
Options and Accessories
For additional information on the options and accessories listed below, contact your 3M Representative.
Part Number
78-8052-6553-1
78-8069-3983-7
70-0066-5081-9
78-8095-4853-6
78-8069-3926-6
70-0064-4965-9
70-0064-4964-2
78-8095-4852-8
78-8095-4853-6
78-8114-0940-4
700rks-NA
Option/Accessory
Box Hold Down Attachment
Caster Kit Attachment
Conveyor Extension Attachment
Bottom Edge Fold Kit 3"
Low Tape Sensor Kit
AccuGlide 3 Upper Taping Head - 3 inch, Type 10800
AccuGlide 3 Lower Taping Head - 3 inch, Type 10800
3-Inch Tape Edge Fold Attachment, Upper Head
3-Inch Tape Edge Fold Attachment, Lower Head
Three Flap Folder Kit
59
2010 January