17 OPERATING MODES
Your ViscosityMaster software has two operating modes; manual and automatic.
•
In manual mode your ViscosityMaster software records measurements as they are taken by
the instrument but it does not control the operation of the Viscometer.
•
In automatic mode your ViscosityMaster software records measurements and it controls the
operation of the Viscometer.
Note: RV1 models can only be used in manual mode. RV2 models can be used in Manual mode
and in Automatic mode.
18 INSTRUCTIONS FOR RV1 VISCOMETERS
Note: RV1 Viscometers can only be used in manual mode - they cannot be used in automatic mode.
18.1 Setting up a batch
1. Click on 'New' and select 'New Batch'.
2. Type a name for the batch and then press the Return key.
R
O
PERATING MODES
35