Reviewing Batch Data - Model T - Elcometer 319 S User Manual

R

11 REVIEWING BATCH DATA - MODEL T

11.1 BATCH READINGS
To view the batch readings:
1 Press Batch/Review Batches
If already in a Batch, press

followed by 'Review Batches'.
 
2 Use the
the required batch, followed by
'Sel' to select.
3 Press 'Rdgs' the view the batch
readings.
4 Press 'Back' to return to the
batch menu.
The date and time of each reading
together with the reading value is
displayed. Press the
scroll through the readings and the
right hand softkey to view the readings
for the next parameter.
The appropriate limit icon is displayed next to readings outside any
enabled limits,
the high limit.
11.2 BATCH STATISTICS
To view the batch statistics:
1 Press Batch/Review Batches
If already in a Batch, press

followed by 'Review Batches'.
 
2 Use the
the required batch, followed by
'Sel' to select.
3 Press 'Stats' the view the batch
statistics.
4 Press 'Back' to return to the
batch menu.
If in an 'Interval Logging' batch,

logging is halted whilst statistics are
displayed. Logging recommences
when 'Back' is pressed.
en-17
sofkeys to select
 
softkeys to
if the reading is below the low limit and
sofkeys to select
if above
www.elcometer.com