Backlight Operation; Simple Statistics; Delete Last Reading - Elcometer 345 Operating Instructions Manual

Coating thickness gauge

Hide thumbs Also See for 345:

Table of Contents

2.9 BACKLIGHT OPERATION:

Elcometer 345 gauges have a backlit display. The backlight is designed for low light operations and can be

turned on and off via the keypad. Turning the backlight off will save battery power.

To toggle the backlight on/off, press and release

. The

symbol will flash on the display. Press and

release

once more. The

will stop flashing and the backlight will be toggled on or off.

When switched on, the backlight comes on when a reading is taken and remains on for 3 seconds.

This feature is normally switched off when the gauge is dispatched from the factory.

Your gauge can display statistical summary information in a preset sequence. The user can select any value

in any sequence from the list of five values, plus an OFF option - see "Statistical summary" on page 21.

This operation will only delete the last reading taken. Previous readings can not be deleted individually.

To delete the last reading from the statistical calculations when the statistics feature is switched on, press

and hold

for more than 2 seconds but less than 4 seconds. The display will show dEL. Release

to delete the last reading,

Note: If

is held for longer than 4 seconds, dEL will change to OFF. Releasing

will switch the

gauge off and the last reading will not be deleted - see "Switching the gauge on/off" on page 10.

Switch on and try again.

Table of Contents

Show Quick Links

Table of Contents