Setting Up The Scanner; Choosing A Place For The Scanner; Releasing The Transportation Lock - Epson 1680 Manual

Setting Up the Scanner

Choosing a place for the scanner

Follow the guidelines below when selecting a location for your scanner.
Place the scanner on a flat, stable surface. The scanner will not operate properly if
it is tilted at an angle.
Place the scanner close enough to the computer for the interface cable to reach it
easily.
Place the scanner near a wall outlet where the power cord can be easily unplugged.
Allow space behind the scanner for the cables, and space above the scanner so that
you can fully raise the document cover.
133 mm*
Keep the scanner away from high temperatures, humidity and excessive dirt or dust.
Also avoid using or storing the scanner in places subject to rapid changes of
temperature and humidity.
Keep the scanner away from direct sunlight and strong light sources.
Avoid places subject to shocks and vibrations.

Releasing the transportation lock

Before connecting the scanner to a power source, you must release the transportation
lock.
1. Place the scanner on a flat, stable surface with the back facing you.
12
332 mm
* When document cover is closed.
550 mm
150 mm or more
562 mm