Error Messages - Planmeca ProMax 2D User Manual

14 ERROR MESSAGES

14 ERROR MESSAGES
74 Planmeca ProMax 2D & 3D s & 3D Classic
NOTE
Contact your service technician for help if you receive an
error message.
The X-ray unit incorporates a self-checking feature that
monitors the operation of the unit. If the system detects a
technical fault an error message (e.g. E201) appears on
the touch screen.
An error message indicates that the X-ray unit has a
problem that needs to be solved before further exposures
can be taken. The X-ray unit will not accept any
commands from the user until the error message is
cleared from the touch screen. Guide the patient away
from the X-ray unit. Then clear the message by touching
the green check mark.
User's Manual (2D)