User Mode 5 (Media Cut At Power On) "U5 - Xerox 721 Operator's Manual

User Mode 5 (Media Cut At Power ON) "U5"

Menu Enter
Press [Menu] 5 times
Menu
Menu
Menu
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
You can enable an Initial Media Cut at Printer Power On. If this
feature is enabled, the printer will feed and cut 240mm of all roll
media when you switch on the machine.
1. Press the [Menu] Key 5 times when the printer is in the
Online
The [Menu] Key lights green and the Status Display indicates "U5"
flashing in the left side of the display. The current setting (0 or 1)
is displayed on the right side.
Enter Online
Press [Enter].
2. To change the value, press [ --> ] Key to increase) and [ <-- ]
Online
Enter
Selectable values are "0" and "1".
0 is NO initial cut at Power On
1 is an initial cut will be made when the printer is turned On.
NOTE: Factory default is "0", Off.
Enter Online
3. Press the [Online] Key to exit the User Mode.
Standby mode.
Key to decrease then press [Enter] to save the data.
USER MODES
57