First Start - Tesla RoboStar iQ100 Manual

safer and stronger than standard glass, please handle it carefully to avoid it being scratched or
broken.
Ideal positioning of the charging station
The area 2 metres in front of the charging station and 1 metre to each side must be free from
obstacles. The charging station must be placed on a level surface. We recommend you stick the
charging station to the wall using double-sided adhesive tape to keep it firmly in place. Position the
power cord in such a way that it does not get tangled in the cleaning brushes. No mirrors or other
items with a strong reflection may be located in the area of the charging station within 15 cm of the
floor. The charging station should not be exposed to direct sunlight.
1. Place the batteries in the remote control and make sure the polarity is correct.
2. Fit the cleaning brushes, left (L) and right (R) as marked.
3. Plug the charging station into the mains using a 230 V power adapter.
4. Place the vacuum cleaning in the charging station and the vacuum cleaner battery will automatically
start to charge.
5. While charging, the "2" button will flash slowly. This will stop flashing once the battery is fully
charged.

FIRST START

Switch the robot vacuum cleaner on and off with a long press of the "2" button on the robot vacuum
cleaner.
Automatic cleaning
1. Select "ON/OFF" or "Random mode" in the smartphone application, press the "2" button on the
robot vacuum cleaner or press the "4" button on the remote control. When starting cleaning, the
vacuum cleaner should always be located in the charging station.
2. To interrupt cleaning/stop the robot vacuum cleaner, press the "2" button or press the "4" button
on the remote control.
Cleaning along the walls
Select "Cleaning along the walls" in the smartphone application or press the "3" button on the remote
control.
Clean specific location
Place the robot vacuum cleaner in the location you want to clean and select "Clean specific location"
in the smartphone application or press the "9" button on the remote control.
Optimised cleaning
Select "Optimised cleaning" in the smartphone application or press the "5" button on the remote
control. When starting cleaning, the vacuum cleaner should always be located in the charging station.
In this mode, the vacuum cleaner will operate in the programmed mode for efficient cleaning.
Planning cleaning
The robot vacuum cleaner can be programmed to clean automatically once a day, always at the
determined time, even if nobody is home. Plan cleaning in the smartphone application. You can set a
one-off timer or individual plans for any day or days of the week. You can switch off a set timer or