Package Content; First Start - Tesla RoboStar iQ600 Manual

 Do not clean the vacuum cleaner with water.

The vacuum cleaner is not waterproof.
 Do not use the vacuum cleaner on a wet floor.
 The robotic vacuum cleaner is not designed for use on elevated, barrier-free areas - built-in floor, staircase, balcony, furniture and more.
The device is equipped with anti-fall sensors, but there may be circumstances where the control system evaluates the situation incorrectly
(dirty sensor, current sensor failure, light reflection, dirt trap etc.) and does not prevent the fall (does not stop the robotic vacuum).
In such cases, the Seller may not accept any Buyer's claims for damage caused to the robotic vacuum.
 Do not expose fluids, burning cigarettes, matches, combustible substances, shards, sharp objects, flour, cement, plaster, loose materials,
larger pieces of paper, plastic bags or other items that can damage the vacuum cleaner.
 An electrostatic charge may occur when vacuuming can be dangerous to the user.
 Inform the roommate about the use of the vacuum cleaner to avoid injury.
 Do not use a robotic vacuum cleaner if its dustbin is full.
 The manufacturer and importer to the European Union is not responsible for any damage caused by the operation of the device, such as
injuries, scalding, fire, injury, damage to other things.

PACKAGE CONTENT

Carefully check you have unpacked all accessories, we recommend keeping the original paper box, user manual and packaging materials for the
warranty period.
USER MANUAL - latest version
As the robotic vacuum cleaner is constantly evolving and improving, we reserve the right to modify the user manual.
You can always find the current version of the user manual at www.tesla-electronics.eu, or directly in the smartphone in TESLA application.

FIRST START

1. Open the back lid of the charging station (A).
2. Put the overlong part of the power cable into the cable channel and connect the power cable to the power (B).
3. Place the charging station against a wall on a level ground and ensure there is enough space around the charging station (C).
4. The condition is a flat surface, we recommend to glue it to the wall or floor with double-sided adhesive tape to fix its position. Position the
power cord properly so that it does not get tangled in the side brushes.