Return To The Charging Station - Tesla RoboStar iQ100 Manual

delete it completely. Hold down the selected timer with your finger. After a while, you will be prompted
to delete it, which you then confirm using the OK button.

RETURN TO THE CHARGING STATION

After pressing the "8" button on the remote control, the robot vacuum cleaner will search for the
charging station and start to charge automatically.
WATER MOPPING
 Switch off the robot vacuum cleaner using the "2" button and place it away from the charging
station.
 Install the blue mopping cloth in the mopping module and fit the module to the robot vacuum
cleaner. Dampen the mopping cloth lightly with water to ensure faster and more fluent mopping.
When removing the mop from the holder, do so carefully to avoid damaging the velcro on the
holder if it is removed too fast. If the mop is dirty after cleaning, you can wash it carefully in
lukewarm water.
 Remove the water reservoir from the vacuum cleaner, open the plastic cover and fill the reservoir
with water. Only refill the water reservoir after removing the reservoir from the vacuum cleaner.
Some residual water may leak when handling the mopping container. In this case, wipe the
spilled area with a dry cloth immediately.

We recommend that you mop the floor with clean water, detergent can cause frothing and make
it more difficult for water to drip onto the mop or cause streaks on the floor after it has dried.
 Carefully insert the water reservoir into the body of the robot vacuum cleaner. Do not pour water
onto the vacuum cleaner or its internal parts, the vacuum cleaner is not waterproof.
 For the best results of mopping, we recommend that you use this function in one room and then
move to the next room.
To mop, press the "6" or "11" button on the remote control. Do not allow the vacuum cleaner to
remain needlessly in one place without moving or with water residue in the water reservoir.

Do not mop carpets.
 Keep a sufficient amount of water for mopping in the mopping module.
 Once cleaning has finished, always pour away the remaining water from the water reservoir, rinse
and dry the mopping cloth.
 Do not charge the battery with the water reservoir filled with water to ensure your safety.
CONTROLLING THE ROBOT VACUUM CLEANER USING A SMARTPHONE
1. Switch on the robot vacuum cleaner using the "2" button.
2. Install the application for controlling the robot vacuum cleaner in your smartphone and follow the
guide for connection of your smartphone and the robot vacuum cleaner.
3. Android: search for "Tuya Smart" in Google Play
Apple: search for "Tuya Smart" in Apple Store
4. Connect your mobile phone to your 2.4 GHz WiFi network and switch on GPS.
5. Create an account in the application.
+
6. Click on the " " button in the application.
7. Select "Small home appliances" in the application on the left, select "Vacuum cleaner (WiFi)" on