Unsaved Initialization Messages - Cabletron Systems MicroMMAC-24E Installation Manual

Table 2-2 Saved Alarm Messages (Continued)
Displayed Messages
Port xxxxxx
Enabled
Port xx Security
Violation
Cable Redundancy
Port xxxxxx Failure
Cable Redundancy
Enable Port xxxxxx

2.3.3 Unsaved Initialization Messages

Unsaved Initialization messages are power-up messages that appear as the
event occurs, but are not saved in a buffer for future recall. Table 2-3 lists
Unsaved Failure or Error messages and Table 2-4 lists normal Unsaved
Initialization messages.
If Failure or Error Messages appear, call Cabletron Systems
!
Technical Support.
CAUTION
Table 2-3 Unsaved Failure or Error Messages
Cabletron
Ctrl. Reg. Err.
Cabletron
SDRAM Failure
Cabletron
SONIC Failure
Cabletron
Console SCC Error
Cabletron
82C54 Failure
MicroMMAC Installation Guide
Using the LCD and LCD DISPLAY Button
Comments
Indicates network ports 1–24, EPIM-1, or
EPIM-2 enabled.
Indicates unauthorized access attempt at ports
1–24.
Indicates failure of redundant link at ports 1–24,
EPIM-1, or EPIM-2.
Indicates redundant link enabled at ports 1–24,
EPIM-1, or EPIM-2.
Cabletron
BBRAM Failure
Cabletron
Modem SCC Error
Cabletron
Bit Swap Failure
Cabletron
LDRAM Failure
Page 2-5