Meter repairs
August 2021
23. Twist and adjust wire removing all slack and seal. Remove excess wire.
24. If required by the site operations manager, have an electrician fully test the
25. Power down the system and apply the sealing compound to the conduit and allow
66
Figure 3-15: Meter with and without security shrouds
A. Transducer cable nut, cable and security seal
B. Security shrouds
connections. After the Acceptance Test is witnessed and approved, seal the
conduit.
to set in accordance with manufacturer specifications.
Maintenance and Troubleshooting manual
Maintenance and Troubleshooting manual
DAN-20057317