Emerson Daniel 3410 Series Maintenance And Troubleshooting Manual page 14

Troubleshooting
August 2021
Figure 2-2: Status summary
2.1.1 Check status
Click the Check Status button if any of the LEDs are yellow or red to see more specific
information causing the status alarm. Some alarms do not require an acknowledge and
will clear automatically when the alarm condition goes away. Alarms that require a user to
acknowledge them will have a button to the right titled ACK. Clicking the ACK button
changes the button text to Wait and sends a request to the meter to clear the alarm. The
alarm will disappear from the Check Status dialog once the alarm actually clears.
Click the Check Status button and Daniel MeterLink
box that gives a short description of all alarms present.
Figure 2-3: Status Summary
A. Active alarm conditions from Meter Monitor page
B. Status summary page with alarm examples
Following is a list and a brief description of the types of alarms:
• System
• Power Loss
14
Maintenance and Troubleshooting manual
™
opens the Status Summary dialog
Maintenance and Troubleshooting manual
DAN-20057317