Emerson Daniel 3410 Series Maintenance And Troubleshooting Manual page 30

Troubleshooting
August 2021
Table 2-3: Meter Monitor maintenance
Daniel MeterLink utility
Meter Monitor (Detailed) view
Meter Data List
MeterLink Tools Menu
30
Maintenance and Troubleshooting manual
(continued)
Diagnostics
Electronics voltage out of range
• Frequency output
Maintenance and Troubleshooting manual
DAN-20057317
Action(s)
• Systems voltages are valid if
1.0V, 1.2V, 2.5V, 3.3V or
the Acquisition Module
valid voltages are 1.2V,
2.5V or 3.3V.
• Replace the CPU Module if
one or more of the System
Voltages is out of range.
• Replace the Acquisition
Module if one or more of
the voltages is out of range.
• Run the Frequency Outputs
test
• If the output reads zero,
you may require a pull up
resistor 1.2k OHM, 0.5W.