Emerson Daniel 3410 Series Maintenance And Troubleshooting Manual page 36

Troubleshooting
August 2021
are not currently connected to the network, then Excel
access the printer driver information and Daniel MeterLink
reports or logs.
One solution is to install a local printer on your machine tied to LPT1. The local printer
driver you installed can be for any printer and the printer does not actually have to exist or
be connected to the PC. If you install a local printer, you can configure Daniel MeterLink to
temporarily change your Windows
Daniel MeterLink. Do this by selecting this local printer for the Override system default
printer selection in the Program Settings dialog. Daniel MeterLink will automatically
change the Windows
will set the Windows
2.3.3 Maintenance logs or trend files are not created
When using Excel
Trend files are not created.
If the Inspection sheet of the Maintenance Log file or the Charts sheet of a Trend files are
not generated, it is probably because Excel
run the Visual Basic
Daniel MeterLink to run the Visual Basic
To enable Excel
Procedure
1. Select Tools → Macros → Security menu path.
36
®
default printer to the selected override printer when it starts and
®
default printer back to its original printer when it closes.
®
2007 or later, some of the worksheets in the Maintenance Logs or
®
script that generates the page. Excel
®
2007 to work with Daniel MeterLink,
®
Figure 2-6: Excel 2007 Tools menu
Maintenance and Troubleshooting manual
®
will most likely not be able to
™
®
default printer over to this local printer while running
®
is not configured to allow Daniel MeterLink to
®
®
script by following the instructions below.
Maintenance and Troubleshooting manual
DAN-20057317
®
cannot use Excel to generate
can be configured to allow